Con 🗼Repeater
How this repeater scores
CoreScope · relative to this mesh- Bridgeweight 0.300.24 × 0.30 = 0.072
How much of the mesh has to pass through it. A chokepoint between two halves of a network scores high.
- Coverageweight 0.250.08 × 0.25 = 0.020
How much of the mesh it can reach, weighted so near neighbours count more than distant ones. It reaches a small part of the mesh. Height and antenna are what move this one.
- Redundancyweight 0.250.90 × 0.25 = 0.224
What breaks if it vanishes. High means nothing else covers its job.
- Trafficweight 0.200.00 × 0.20 = 0.000
How much it actually relayed, measured rather than inferred from the map. It is carrying little traffic compared with the busiest repeater here.
What would actually change this
- This one is well sited
It out-reaches 35 of the 46 repeaters within 25 miles, which average 0.05. If the grade is still low, that is about position in the network rather than anything the radio is doing wrong.
Every axis is scored against the other repeaters this analyzer can see, so 1.00 means “the best of these” rather than perfect, and a grade here is not comparable with one from another mesh. CoreScope’s own note on the bands is that they are a first cut, not tuned against real data — so treat the letter as a rough impression and the number as the real answer.