If you are interested in contributing to Tulsa's CoreScope observer network here are the quick and easy steps to get your site reporting!
I assume you know how to flash nodes, I will not be elaborating on this process.
First you need to make sure you have the required hardware. Follow this link and see what devices are compatible. MeshCore flasher
Once you have finished flashing the device, keep it connected to your computer and connect to it with the configuration tool via USB. Give it a name and set your admin password etc etc as would normally. GIVE THE NODE POSITION COORDINATES. This is important so it shows up on the map. If privacy is a concern, be obscure but approximate, try to keep it within 0.5 -1 miles of the true location. Once you've completed the node setup process go into the console and enter these commands to setup MQTT reporting:
Start by configuring your wifi:
set wifi.ssid yourwifihere
set wifi.pwd yourpasswrdhere
reboot
Allow the device to reboot then reconnect and go back into the console for further commands:
set mqtt.iata TUL
set mqtt2.preset custom
set mqtt2.server wss://mqtt.tulsa-mesh.com:443/mqtt
set mqtt2.audience mqtt.tulsa-mesh.com
reboot
go to https://corescope.tulsa-mesh.com/#/observers to verify your node has started reporting. if it isn't on this list, you made an error. you can go back through the commands and make sure you didn't typo anything or reflash entirely if that doesn't work.